AIM — FAA OPERATIONAL GUIDANCE

7-4-7 Helicopters

AIM Chapter 7. Safety of Flight — Section 7-4, Wake Turbulence

Official text — AIM 7-4-7

AIM — FAA OPERATIONAL GUIDANCE

In a slow hover taxi or stationary hover near the surface, helicopter main rotor(s) generate downwash producing high velocity outwash vortices to a distance approximately three times the diameter of the rotor. When rotor downwash hits the surface, the resulting outwash vortices have behavioral characteristics similar to wing tip vortices produced by fixed wing aircraft. However, the vortex circulation is outward, upward, around, and away from the main rotor(s) in all directions. Pilots of small aircraft should avoid operating within three rotor diameters of any helicopter in a slow hover taxi or stationary hover. In forward flight, departing or landing helicopters produce a pair of strong, high-speed trailing vortices similar to wing tip vortices of larger fixed wing aircraft. Pilots of small aircraft should use caution when operating behind or crossing behind landing and departing helicopters.

Reproduced from the FAA Aeronautical Information Manual (Basic (with Change 3)). The AIM is FAA guidance, not regulation. Verify against the official source before relying on it operationally.

Is this a regulation?

No — this is FAA guidance, not a regulation.

Aeronautical Information Manual. FAA operational guidance and recommended practices. The AIM is not regulatory, although it often explains how to comply with regulations.

SkeyeMentor FAA Library is an educational reference and study aid. Regulatory and FAA materials can change. SkeyeMentor provides links and contextual explanations to help pilots study, but users should verify current requirements through official FAA, eCFR and other applicable government sources before relying on them operationally. SkeyeMentor explanations are educational and are not legal advice.