§ 91.130 Operations in Class C airspace
14 CFR Part 91 — Subpart B—Flight Rules
Official text — 14 CFR § 91.130
REGULATION — LEGALLY BINDING(a) General. Unless otherwise authorized by ATC, each aircraft operation in Class C airspace must be conducted in compliance with this section and § 91.129. For the purpose of this section, the primary airport is the airport for which the Class C airspace area is designated. A satellite airport is any other airport within the Class C airspace area.
(b) Traffic patterns. No person may take off or land an aircraft at a satellite airport within a Class C airspace area except in compliance with FAA arrival and departure traffic patterns.
(c) Communications. Each person operating an aircraft in Class C airspace must meet the following two-way radio communications requirements:
(1) Arrival or through flight. Each person must establish two-way radio communications with the ATC facility (including foreign ATC in the case of foreign airspace designated in the United States) providing air traffic services prior to entering that airspace and thereafter maintain those communications while within that airspace.
(2) Departing flight. Each person—
(i) From the primary airport or satellite airport with an operating control tower must establish and maintain two-way radio communications with the control tower, and thereafter as instructed by ATC while operating in the Class C airspace area; or
(ii) From a satellite airport without an operating control tower, must establish and maintain two-way radio communications with the ATC facility having jurisdiction over the Class C airspace area as soon as practicable after departing.
(d) Equipment requirements. Unless otherwise authorized by the ATC having jurisdiction over the Class C airspace area, no person may operate an aircraft within a Class C airspace area designated for an airport unless that aircraft is equipped with the applicable equipment specified in § 91.215, and after January 1, 2020, § 91.225.
(e) Deviations. An operator may deviate from any provision of this section under the provisions of an ATC authorization issued by the ATC facility having jurisdiction over the airspace concerned. ATC may authorize a deviation on a continuing basis or for an individual flight, as appropriate.
Reproduced from the eCFR. Text as amended through 2026-07-31. Verify against the official source before relying on it operationally.
SkeyeMentor explanation
Educational — not an FAA sourceIn plain English
Operations in Class C airspace, including the two-way radio communication requirement, equipment requirements, and arrival and departure rules.
Why it matters
Class C adds an equipment dimension that Class D does not have.
Quick example
List the equipment this section requires for VFR flight in Class C airspace.
Written and reviewed by the SkeyeMentor editorial team. This explanation is a study aid, not legal advice, and it is not part of the official text above. Verify current requirements through the official source before relying on them operationally.
Is this a regulation?
Yes — this is regulatory text and is legally binding.
Text published in the Code of Federal Regulations. Regulations are legally binding on pilots and operators.
Yes — this is the text of a Federal Aviation Regulation. It is legally binding. The explanation below it is SkeyeMentor educational content, not part of the regulation.