§ 91.421 Rebuilt engine maintenance records
14 CFR Part 91 — Subpart E—Maintenance, Preventive Maintenance, and Alterations
Official text — 14 CFR § 91.421
REGULATION — LEGALLY BINDING(a) The owner or operator may use a new maintenance record, without previous operating history, for an aircraft engine rebuilt by the manufacturer or by an agency approved by the manufacturer.
(b) Each manufacturer or agency that grants zero time to an engine rebuilt by it shall enter in the new record—
(1) A signed statement of the date the engine was rebuilt;
(2) Each change made as required by airworthiness directives; and
(3) Each change made in compliance with manufacturer's service bulletins, if the entry is specifically requested in that bulletin.
(c) For the purposes of this section, a rebuilt engine is a used engine that has been completely disassembled, inspected, repaired as necessary, reassembled, tested, and approved in the same manner and to the same tolerances and limits as a new engine with either new or used parts. However, all parts used in it must conform to the production drawing tolerances and limits for new parts or be of approved oversized or undersized dimensions for a new engine.
Reproduced from the eCFR. Text as amended through 2026-07-31. Verify against the official source before relying on it operationally.
No SkeyeMentor explanation yet
We have not written a plain-English explanation for this section yet. The official text above is complete and is what governs.
Is this a regulation?
Yes — this is regulatory text and is legally binding.
Text published in the Code of Federal Regulations. Regulations are legally binding on pilots and operators.